If the pressure cooker cannot be closed following the above description, check if the pressure indicator is
inserted in the lid grip. If not,
push the lock against accidental opening away from the centre of
the lid
- the pressure indicator will slip in automatically and the pressure cooker can be closed.
DO NOT APPLY INAPPROPRIATE FORCE WHEN CLOSING THE PRESSURE COOKER.
Cooking in the pressure cooker (Fig. L, M, N)
SELECT LOW OR HIGH PRESSURE BY SETTING THE REGULATOR TO THE RELEVANT POSITION.
If you wish to cook at
1.
a low pressure
, turn the pressure regulator
to the right
.
Cooking at
a low pressure is ideal for economic cooking of meals, for example for cooking vegetables, fruits,
fi sh, etc. (Fig. L).
If you wish to cook at
2.
a high pressure
, turn the pressure regulator
to the left
.
Cooking at
a high pressure is quicker and uses a higher temperature. It is suitable in particular for cooking
meat and meals that require longer thermal treatment (Fig. M).
Place the correctly fi lled and closed pressure cooker with the selected pressure onto a cooker set
3.
to the
highest output
.
The red pressure indicator placed in the lid grip
4.
will slip upwards
after a short while. This means that
the minimum pressure has been generated in the vessel and the pressure cooker can no longer be
opened - steam will begin to escape from the aperture in the pressure regulator after a while (Fig. N).
When steam begins to escape from the aperture in the pressure regulator, reduce the heat output
5.
so that only a
small amount of steam
escapes from the aperture in the pressure regulator.
6.
We do not recommend
changing the low / high pressure setting while cooking.
If this is necessary, use a
7.
kitchen mitten
to control pressure during the cooking process!
WARNING! A MINUTE AMOUNT OF STEAM MAY ALSO ESCAPE FROM THE APERTURE BELOW THE LID GRIP
DURING THE COOKING PROCESS.
WARNING
If a
large amount of steam
escapes from the pressure cooker at the beginning of the cooking process, the
pressure cooker has not been correctly closed. Incorrect closing is usually due to the following:
The lid is attached incorrectly - close the pressure cooker again.
a)
The pressure regulator of the operating valve has slipped up to the steam release position - push
b)
the pressure regulator downwards and set it to the low or high pressure cooking position.
The silicone seal is incorrectly positioned in the lid - check its position.
c)
The silicone seal is faulty - replace it with a new original Tescoma seal.
d)
Cooking termination, steam releasing and opening of the pressure cooker (Fig. O)
ALWAYS RELEASE STEAM ONLY AFTER REMOVING THE PRESSURE COOKER FROM HEAT.
After the time required for cooking your meal elapses,
remove the pressure cooker from the heat
source
even if the latter
has already been switched off
.
Set
the pressure cooker
aside for a while
to allow the temperature and pressure in the pressure cooker
to drop suffi ciently.
Then push the steam release button and
hold it until all steam has escaped from the pressure
cooker (Fig. O).
The pressure indicator will slip down automatically after the steam has been entirely
released and the pressure dropped; the
pressure cooker can be opened now
.
Summary of Contents for Bio exclusice+
