Terrasat Rx 1+1, Operation Manual

Page: 98 / 174

B-4
|
Rx 1+1 Hand-held Terminal Menu Tree
accessing those options by using the up and down arrow keys to access the submenus,
the user can now use the right and left arrow keys to move between submenu branches
because the system “learns” to access those two options. Users can continue lateral
movement by using the right and left arrow keys.
There is no need to logout from the HHT once the session is complete. However, once
the HHT is disconnected from the system or the firmware is rebooted, all of the
previous learned menu movements are lost.
Info & Sensors
Rx Power Levels
– Displays the input LNB power levels.
Sensors
– Displays unit power supply voltage and current.
Revisions
– Displays firmware and hardware revision strings.
Alarm
View Rx Alarms
– Displays current receiver alarms.
View Misc Alarms
– Displays current miscellaneous alarms.
View Log
– Displays the unit alarm log.
Clear Log
– Clears the unit alarm log.
A: Suppress Faults
– Displays or sets whether alarms configured for suppression are
suppressed.
B: Suppress Faults
– Displays or sets whether alarms configured for suppression are
suppressed.
A: Simulate Fault
– Displays or sets a major receive alarm (used for
troubleshooting).
B: Simulate Fault
– Displays or sets a major receive alarm (used for troubleshooting).
Configure Alarms
– Displays or sets whether individual alarms cause a major/minor/
no alarm and whether the alarm is suppressible.
10 Mhz Reference Alarm
– Disables the 10 MHz reference alarm.
Thresholds
A: Input Level Low
– Displays or sets the input power low threshold.