Terrasat Rx 1+1, Operation Manual

Page: 108 / 174

C-8
|
Using HyperTerminal
2. Click
Cancel
when prompted to type a name and to choose an icon for the
connection.
3. From the menu bar, choose File → Open.
A list of previously saved HyperTerminal names appears.
4. Click the connection name you want to use, and then click
Open
.
A blank HyperTerminal window with the previously saved settings appears.
5. Type
CPE=1234
and then press Enter to log into the Rx 1+1 system.
(Note: If the password has been changed, use that value instead of the default
1234
.)
You can now enter ASCII commands at the prompt.
Note:
When you create a named connection and then save it, that connection name will also
appear as an option when you choose Start
→ All Programs → Accessories →
Communications → HyperTerminal → <
Named Connection
>. Click the name to
access your saved connection settings.
Ending a HyperTerminal Session
To end the HyperTerminal session,
• Choose File → Exit.