Terrasat Rx 1+1, Operation Manual

Page: 77 / 174

RS485
|
5-15
For SET Commands, the format is as follows:
<address/command=XXX[CR}
Example:
<0001/CPE=1234{CR}
ASCII Mode Response Format
• Start of Packet: > (ASCII code 62; 1 character)
• Target Address: (4 characters)
• Address De-limiter: / (ASCII code 47; 1 character)
• Variable Length Data: (
n
characters)
• End of Packet: Carriage Return (ASCII code 13; 1 character)
Example:
>0001/{Variable Length Data}{CR}
Commands and values available in ASCII mode are shown in the command set in
Appendix D .