Terrasat Rx 1+1, Operation Manual

Page: 97 / 174

M enu Options
|
B-3
To enable the HHT,
1. Connect the HHT to the system by attaching the 19-pin connector to J1.
2. When the connection is made and the HHT is receiving power, a blinking cursor
appears in the upper left corner of the HHT display.
3. To initialize a session, enter “
. . . .
” by using the decimal key on the HHT keypad.
The screen displays the model number and serial number and the system requests a
password, as shown in
Figure B.2 .
Figure B.2
Sample Hand-held Terminal Initial Display
4. Enter the password by using the number keys on the HHT, and then press the
“ENTER” key.
The default password is “1234”.
5. The “Main Menu” window shown in Figure B.3 appears.
Figure B.3
Sample Main Menu Window
6. The unit is now ready to receive input.
Note:
The HHT now offers “adaptive learning;” that is, users no longer need to scroll up and
down through all of the menu options during a single session. For example, if a user
repeatedly uses the IP Address and Clear Alarm Log options, after the first time