Operator's Manual
Second Edition • Second Printing
Work Area Safety
20
S
®
-80 XC
™
• S
®
-85 XC
™
Part No. 1311085GT
Panel Cradle Safety
Read, understand and obey all warnings and
instructions provided with the panel cradles.
Do not exceed the rated platform capacity. The
combined weight of the cradles, panels,
occupants, tools and any other equipment must
not exceed rated capacity.
The panel cradle assembly weighs 30 lbs/13.6 kg.
The maximum capacity of the panel cradles is
250 lbs/113 kg.
The weight of the panel cradles and the load in the
panel cradles may limit the maximum number of
occupants in platform to one person.
Secure the cradles to the platform. Secure the
panel (s) to the platform railing using the straps
provided.
Do not operate unless you are adequately
instructed and are aware of all hazards associated
with lifting panels.
Do not cause a horizontal force or side load to
machine by raising or lowering a fixed or
overhanging load.
Maximum vertical height of panels: 4 ft/1.2 m.
Maximum wind speed: 15 mph/6.7 m/sec.
Maximum panel area: 32 sq ft/3 m
2
.
Welder Safety
Read, understand and obey all warnings and
instructions provided with the welding power unit.
Do not connect weld leads or cables unless the
welding power unit is turned off at the platform
controls.
Do not operate unless the weld cables are
properly connected and the welder is properly
grounded.
The weight of the welder will reduce the rated
platform capacity and must be factored into the
total platform load. The welder power supply
weighs 75 lbs/34 kg.
Do not operate the welder unless a fire
extinguisher is immediately available for instant
use, per OSHA regulation 1926.352(d).
Summary of Contents for Genie S-80 SC
Page 78: ......
