Apoolo-S10
User Manual
15
www.terasic.com
March 31, 2020
Figure 2-1
The MSEL pin setting
Active Serial (Fast) mode
In AS mode, the FPGA's configuration file is stored in the QSPI flash. The Secure
Device Manager (SDM) in Stratix 10 FPGA is responsible for the entire AS mode
process and interface. The SDM will load the initial configuration firmware from the
QSPI flash to configure the FPGA including FPGA I / O and core configuration. HPS
part of the boot can also be completed in this mode.
shows the architecture
of the AS mode of the Apollo S10 board.
Figure 2-2
AS mode for the Apollo S10 board
For more information on the configuration of Stratix 10 FPGAs, please refer to the file:
Intel Stratix 10 Configuration User Guide
