Telenetics Corporation FT100 S, Installation And Operation Manual

Page: 77 / 134

FT 100S 5-1
Chapter 5
Operation
GENERAL
After installation and configuration, the FT 100S operates automatically
and unattended.
CONTROLS AND INDICATOR
The FT 100S front panel contains three pushbuttons (YES, NO,
HOME), a 2 line by 16 character LCD, and six light emitting diode
(LED) indicators. Almost all configuration options and diagnostic
features can be accessed by using the LCD and pushbuttons. Chapter 4
describes front panel option selection.
LED DESCRIPTION
The six front panel LEDs on the FT 100S consist of the following:
TD
Transmit data indicates activity on the DTE transmit data line. Flashing
indicates data is being transmitted. Solid ON indicates a low state on the
transmit data line, and a solid OFF indicates a high state or no data being
transmitted.
RD
Receive data indicates activity on the DTE receive data line. Flashing
indicates data is being received. Solid ON indicates a low state on the
receive data line, and a solid OFF indicates a high state or no data being
received.