Telenetics Corporation FT100 S, Installation And Operation Manual

Page: 15 / 134

FT 100S 2-1
Chapter 2
Installation
GENERAL
This chapter provides installation information for the FT 100S. If
changing hardware options to meet system requirements, refer to
Chapter 3 before installation.
☞
Note
When requesting T1 network service, personnel operating
this equipment must complete the affidavit in the front of
this manual and file it with the telephone company
providing service.
RECEIPT INSPECTION
Inspect the equipment carefully for damage that may have occurred in
shipment. If there is damage or material shortage, contact the shipping
agent and Telenetics authorized agent for advice and assistance. Retain
the shipping container and packing material for possible future ship-
ment.
The FT 100S arrives with the following components:
•
Standalone housing containing two main circuit boards
•
Two user specified piggyback interface boards/adapters
•
Power transformer with cable
•
T1 line cables
•
V.35 adapter (included with V.35 unit)
•
User's Guide
The following components must be supplied by the user:
•
RS-449 adapter
•
Control port adapter