Telenetics Corporation FT100 S, Installation And Operation Manual

Page: 103 / 134

Control Port Operation
FT 100S 6-25
(R)PU3 the previous 24-hour accumulation of bursty errored
seconds data.
(R)PU4 the previous 24-hour accumulation of Severely Error
Seconds data.
(R)PU5 the previous 24-hour accumulation of unavailable
seconds data.
(R)PU6 the previous 24-hour accumulation of control slip
seconds and loss of frame count data.
(R)PU7 to reset the performance monitoring counters.
(R)PU8 to reset the errored ESF counter.
REMOTE FT 100S CONFIGURATION
The FT 100S has the capability of configuring a remote FT 100S or FT
100 using the ESF Facility Data Link (FDL) and a proprietary protocol.
Remote configuration is accomplished through the use of the control
port or LocalView. Since the ESF Data Link is utilized for this feature,
the framing option on all units must be selected for "ESF”.
☞
Note
Changing remote framing from ESF to SF will disable
remote configuration and may cause errors.
The following is a description of the various command strings used in
remotely configuring an FT 100S or FT 100.
Configuration Control CRC
The choice for this option determines whether the information displayed
for the various control port screens pertains to the local unit or remote
unit. If the configuration control is selected for remote configuration, all
the information displayed on the various option and summary screens
shows the configuration of the remote unit at the time that its configura-
tion was last downloaded (CR1 command). If the configuration control
is selected for local configuration, the configuration information is that
of the local unit.