Teledyne ADFM Analog Output Module, Technical Manual, Page: 97 / 156

ADFM Commands
EZ - Sensor Source:
Purpose: The EZ-command selects the source of environmental sensor
data.
Format: EZcdhprst
Default EZ1011111
Range: Firmware switches (see description)
Description Setting the EZ-command firmware switches tells the ADFM
to use data from a manual setting or from an associated sen-
sor. When a switch value is non-zero, the ADFM overrides
the manual E-command setting and uses data from the appro-
priate sensor. If no sensor is available, the ADFM defaults to
the manual E-command setting. The following table shows
how to interpret the sensor source switch settings.
Table C-5: Sensor Source Switch Settings
Field Value = 0 Value = 1 Value = 2
c Manual EC Calculate using
ED, ES, and ET N/A
d Vertical beam only Vertical beam
and secondary
depth sensor N/A
h Manual EH Heading N/A
p Manual EP Pitch (Tilt 1) N/A
r Manual ER Roll (Tilt 2) N/A
s Manual ES N/A N/A
t Manual ET Transducer
Sampled N/A
Example EZ1111101 means calculate speed of sound from readings,
use secondary depth sensor, transducer heading, internal tilt
sensors, and transducer temperature.
ADFM Technical Manual (January 2000) page C-17