Teledyne ADFM Analog Output Module, Technical Manual, Page: 95 / 156

ADFM Commands
ES - Salinity
Purpose: Sets the water’s salinity value.
Format: ES nn
Range: nn = 0 to 40 parts per thousand
Default: ES00
Description: ES sets the water’s salinity value. The ADFM uses ES in its
speed of sound calculations. The ADFM assumes the speed of
sound reading is taken at the transducer head.
ET - Temperature
Purpose Sets the water’s temperature value.
Format ET± nnnn
Range ± nnnn = -5.00 C to +40.00 C
Default ET+2500
Description ET sets the temperature value of the water. The ADFM uses
ET in its speed of sound calculations. The ADFM assumes
the speed of sound reading is taken at the transducer head.
Example Convert temperatures of +14 C and -3.5 C to ET-command
values.
ET = 14.00 × 100 = 1400 = ET1400 (+ is understood)
ET = -3.50 × 100 = -350 = ET-0350
EX - Coord Transform
Purpose: Sets the coordinate transformation processing flags.
Format: EX nnnnn
Range: Firmware switches (see description)
Default: EX00000
Description: EX sets firmware switches that control the coordinate trans-
formation processing for velocity and percent-good data.
ADFM Technical Manual (January 2000) page C-15