manualshive.com logo in svg

Teledyne ADFM Analog Output Module, Technical Manual, Page: 93 / 156

Share
Download
Teledyne ADFM Analog Output Module Technical Manual Download Page 93

 

ADFM Commands 

C-2.2 

Environmental Sensor Commands 

The ADFM uses the following commands to control the environmental and 
positional information that affects internal data processing. 

EA Heading Alignment 

Purpose: 

Corrects for physical misalignment between the long axis of 
the ADFM transducer and the channel it is deployed in. 

Format: EA+

nnnnn

 

Range: 

±nnnnn = -179.99 to 180.00 degrees 

Default: EA00000 

Description 

EA is an alignment angle (referenced to the long axis of the 
ADFM transducer) used as a new zero reference for heading 
output and for transformation to earth coordinates.   

EC - Speed Of Sound 

Purpose: 

Sets the speed of sound value used for ADFM data processing. 

Format: EC

nnnn

 

Range: 

nnnn

 = 1400-1600 meters per second 

Description:  EC sets the sound speed value used by the ADFM to scale ve-

locity data, depth cell size, and range to the surface.  The 
ADFM assumes the speed of sound reading is taken at the 
transducer head 

ED - Depth Of Transducer 

Purpose: 

Sets the ADFM transducer depth. 

Format: ED

nnnn

 

Range: 

nnnn

 = 0 to 9999 decimeters (meters x 10) 

Description:  ED sets the ADFM transducer depth.  This measurement is 

taken from sea level to the transducer faces.  The ADFM uses 
ED in its speed of sound calculations.  The ADFM assumes 
the speed of sound reading is taken at the transducer head. 

ADFM Technical Manual (January 2000) 

page C-13 

Summary of Contents for ADFM Analog Output Module





























































































































































Reviews:

No comments