Teledyne ADFM Analog Output Module, Technical Manual, Page: 101 / 156

ADFM Commands
given remotely over the Modem interface since turning off the
Modem would cause communications with the ADFM to be
lost.
MT - Modem Terminal
Purpose: Allows for a direct connection to the modem.
Format: MT
Description: Entering ‘MT’ at the ADFM command prompt will cause the
ADFM to go into a mode where it passes all input via the RS-
232 to the Modem, and passes all input from the Modem to
the RS-232. This gives the operator connected to the RS-232
interface a direct connection to the Modem, and is just like
talking to a local Modem from a PC. The operator can give
any valid ‘AT’ commands and see all responses from the Mo-
dem, including dialing out and communicating with a host.
This command is normally only used for troubleshooting, and
is disabled if given remotely over the Modem interface.
MZ - Modem Reset
Purpose: Resets the modem.
Format: MZ
Description: This command will cause the ADFM to reset the Modem to its
factory default settings. See the Modem instruction manual
for more details.
ADFM Technical Manual (January 2000) page C-21