Teledyne ADFM Analog Output Module, Technical Manual, Page: 120 / 156

Appendix C
In ASCII mode (CFxx0xx), the ADFM returns the message
"Jumped:
xxxxx ", where xxxxx is the actual number of ensem-
bles skipped. Usually, xxxxx = nnnnn , except when trying to
jump beyond a deployment boundary.
Example:
>CF 01010 {SET MANUAL ENSEMBLE CYCLING}
>RJ 99999 ERR 021: SELECT DEPLOYMENT FIRST (RD ###)
>RD 3 {DEPLOYMENT "3" SELECTED}
>RJ 99999
Jumped: +324 {SHOWS THERE ARE 324 GOOD ENSEMBLES IN DEPLOYMENT
RECORD}
>CS ERR 022: NO MORE ENSEMBLES {BECAUSE "END OF DEPLOYMENT" MARKER
REACHED}
>RJ -1
>CS
{...Data for ensemble #324 (last ensemble) shown here...}
>RD 3 {GO TO BEGINNING OF DEPLOYMENT #3, ENSEMBLE #1}
>RJ 57 {JUMP TO ENSEMBLE #58 [#1 + 57]}
Jumped: +57
>RJ -10 {JUMP TO ENSEMBLE #48 [#58 - 10]}
Jumped: -10
>CS
{...Data for ensemble #48 shown here...}
>CS
{...Data for ensemble #49 shown here...}
>RJ 0 {REPEAT LAST ENSEMBLE}
Jumped: +0
>CS
{...Data for ensemble #49 shown again...}
>RJ -999 {IN EFFECT, JUMP TO BEGINNING...}
Jumped: -48 {...BECAUSE ENTRY EXCEEDED DEPLOYMENT BOUNDARY}
>CS
{...Data for ensemble #1 shown here...}
If the ADFM is in BINARY mode (CFxx1xx), RJ returns a
message of seven binary bytes, where:
Byte 1 = 05h (size of message, not including checksum)
Byte 2 = LSB of
xxxxx
Byte 3 = mid-LSB of xxxxx
Byte 4 = mid-MSB of xxxxx
Byte 5 = MSB of xxxxx
Byte 6 = [CSUMLO] (LSB of 16-bit checksum of bytes 1-5)
Byte 7 = [CSUMHI] (MSB of 16-bit checksum of bytes 1-5)
RS - Recorder Space Used/Free
Purpose: Lists the amount of used and free recorder space.
Format: RS
Description: RS lists the amount of recorder space used and free in 1-MB
increments (1 MB = 1,048,576 bytes)
Example:
page C-40 MGD Technologies, Inc.