Teledyne ADFM Analog Output Module, Technical Manual, Page: 106 / 156

Appendix C
Table C-7: Error Code Hex to Binary Conversion
Hex Digit Binary Hex Digit Binary
0 0000 8 1000
1 0001 9 1001
2 0010 A 1010
3 0011 B 1011
4 0100 C 1100
5 0101 D 1101
6 0110 E 1110
7 0111 F 1111
To convert error code $32CF (note: the dollar sign “$” signifies hexi-
decimal), convert 32CF to binary. Error code $32CF has the following bits
set: 13, 12, 9, 7, 6, 3, 2, 1, 0.
Hex Digit $ 3 2 C F
Binary 0 0 1 1 0 0 1 0 1 1 0 0 1 1 1 1
Bit # 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PT0 – Help
Purpose: Displays the test menu (shown below).
Format: PT0
Description: As implied by the NOTE, adding 100 to the test number re-
peats the test continually until the ADFM receives a
<BREAK>. Sending PT200 runs all tests. PT300 runs all
tests continually until the ADFM receives a <BREAK>.
>pt0
Built In Tests
----------------
PT0 = Help
PT1 = Board Level Receive Test
PT2 = Ancillary System Data
PT3 = Receive Path
PT4 = Transmit Path
PT5 = Electronics Wrap Around
PT6 = Receive Bandwidth
PT7 = NA
PT8 = Checksum Lookup Tables
NOTE: Add 100 for automatic test repeat
PT200 = All tests
page C-26 MGD Technologies, Inc.