How to Operate Your Instrument
Front Panel Controls
The waveform monitor uses a touch-panel display, front-panel knobs and buttons to control the waveform monitor.
Button
Function
SELECT
Toggles the selection between two or more items, sequences the selected
item through a group of items. The SELECT button is lit when it is available
for use.
DISPLAY
Displays the Views menu allowing you to change the display between one
and four-tile view and select which tile is displayed in full-screen mode.
WFM
Changes the selected tile to display the input signal as a waveform.
VECTOR
Changes the selected tile to display the input signal on a vectorscope
screen.
PICTURE
Changes the selected tile to display the input signal as a picture.
AUDIO
Changes the selected tile to display the Audio level and status screen.
STATUS
Displays the last Status display shown in the active tile and displays a
menu allowing you to change the selected tile to display a status screen,
a session display, or the error log.
MAIN
Displays the Main menu and Main pop-up menu, providing access to
primary and secondary menus. Some displays are selectable only in the
pop-up menu.
USER
Displays a user-defined menu.
CAPTURE
Displays menu that enables screen capture of live display.
MEASURE
Displays the last Measure display shown in the active tile and displays a
menu allowing display and configuration of the Eye, Jitter, DataList, ANC
Display, Timing, Bowtie, and Lightning displays.
PRESETS
Displays menu enabling save and recall of instrument settings.
MAG/GAIN
Displays the Mag/Gain menu with controls for the Vertical Magnification
and Horizontal Gain.
LINE SEL
Enables/disables Line Select mode, displays Line Select menu if Line
Select is enabled, but the Line Select menu is not visible.
12
Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
