Remote Communications
Remote Communications
Remote communications that are covered here include those that are:
Over an Ethernet network through a Web browser.
Over an Ethernet network through a Java applet.
Using the Remote Web Interface
You can connect to the waveform monitor and perform simple operations without installing any software and using just a
Web browser. To use a Web browser to connect to a waveform monitor, the waveform monitor must be connected to an
IP network via Ethernet. You will need to set the IP Config Mode, IP Address, Subnet Mask, and possibly the Gateway
Address depending on your network configuration.
Using only a Web browser, you can save screen captures, download the error log, download the diagnostics log, and view
the instrument options. To connect to the waveform monitor using a Web browser:
1.
Set up the waveform monitor to connect
to a network (if you have not already
done so. (See page 51,
To Connect to
a Network
.)
2.
Start your Web browser and type the
network address of the waveform
monitor into the URL entry box like this:
http://123.123.123.123
NOTE.
Many Web browsers do not
correctly interpret IP addresses with leading
zeros. If the IP address shown in the
Con
fi
guration menu contains leading zeros
as in 124.161.038.151, remove the "0" when
entering it into the address line of the browser.
For example, 124.161.038.151 should be
entered as 124.161.38.151.
124
Quick Start User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
