How to Operate Your Instrument
Change the settings based on your requirements:
SNMP Traps: This setting allows you to turn on or off the capability of the waveform monitor to generate SNMP traps.
SNMP Public Comm. String: This setting specifies the string that SNMP commands must include to have read-only
access. The default public community string is “public”. If you enter a new string, the waveform monitor will strip any
leading or trailing spaces in the string: for example, “ my stuff ” will become “my stuff”. The public community string
cannot be blank. If you input a blank string, the instrument will set it to the default string.
SNMP Private Comm. String: This setting specifies the string that SNMP commands must include to have read/write
access. The default private community string is “private”. If you enter a new string, the waveform monitor will strip any
leading or trailing spaces in the string: for example, “ my stuff ” will become “my stuff”. The private community string
cannot be blank. If you input a blank string, the instrument will set it to the default string.
Trap Destination 1–4 Address: These settings allow you to set IP addresses to which SNMP traps are sent.
Remote SNMP Mode: This setting enables you to allow or deny remote control access to the waveform monitor over a
network. You can still access the waveform monitor using the Web Interface when this setting is Disabled, but you will not
be able to view or change instrument settings using SNMP management software. If this setting is Read Only, you can
view instrument settings but not change them. If this setting is Enabled, you can view and change instrument settings
using SNMP management software.
10.
Press the
Close
soft keys to close the
submenus.
Quick Start User Manual
53
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
