Tektronix TekScope THS 710, User Manual

Page: 158 / 197

THS 710 & THS 720 User Manual D–1
Appendix D: Performance Verification
This appendix contains performance verification procedures for the
specifications marked with the
n
symbol. The following equipment,
or a suitable equivalent, is required to complete these procedures.
Description
Minimum
Requirements
Examples
DC Voltage Source 60 mV to 800 V,
±
0.1%
accuracy
Wavetek 9100 Universal
Calibration System with
Oscillosco e
libr tio
AC Voltage Source 300 mV to 640 V,
±
0.5%
accuracy at 500 Hz
Oscilloscope Calibration
Module (Option 250)
Fl e 00A lti ro
Leveled Sine Wave Gen-
erator 50 kHz and 100 MHz,
±
3% amplitude accuracy
Fluke 5500A Multi-prod-
uct Calibrator with Oscil-
loscope Calibration
Time Mark Generator 10 ms period,
±
50 ppm
accuracy
losco e libr tio
Option (Option
5500A-SC)
Banana to Banana
Cable (two required) Shielded banana jacks
on each end Tektronix Deluxe Meter
Lead Set (012-1483-XX)
50 BNC Cable BNC male to BNC male,
≈
36 in (1 m) long
Tektronix part number
012-0482-XX
50 Feedthrough Ter-
mination
BNC male and female
connectors Tektronix part number
011-0099-XX
Dual Banana to BNC
Adapter Banana plugs to BNC
female Tektronix part number
103-0090-XX