Tektronix TekScope THS 710, User Manual

Page: 150 / 197

THS 710 & THS 720 User Manual B–1
Appendix B: Factory Setup
The table below lists the state of the TekScope instrument after you
recall the Factory Setup.
Control Changed by Factory Setup to
Acquire mode Sample
Acquire stop after HOLD button only
Acquire # of averages 16
Acquire # of envelopes 8
Channel selection Channel 1 on, all others off
Cursor H Bar 1 position –3.2 divisions from the center
Cursor H Bar 2 position +3.2 divisions from the center
Cursor V Bar 1 position –2 divisions from the center
Cursor V Bar 2 position +2 divisions from the center
Cursor function Off
Cursor time units Seconds
Delayed time base time/div 50
m
s/div
Delay time, delayed runs after main 200 ns
Data logger rate 30 s/div
Display format YT
Display graticule type Full
Display contrast 50%
Display style Vectors
Display trigger “T” On
Display accumulate time 500 ms