Tektronix TekScope THS 710, User Manual

Page: 146 / 197

Appendix A: Specifications
THS 710 & THS 720 User Manual A–13
General Specifications (Cont.)
RS-232 Interface
Device Type DTE
RJ-45 Connector
Pi o t Pin Number Signal
Pinout
1 DCD
2 DSR
3 DTR
4 GND
5 RXD
6 TXD
7 CTS
8 RTS
Probe Compensator Output
Output Voltage, typical
5.0 V into
≥
1 M load
Frequency, typical 1.2 kHz
Power Source
Battery Replaceable Ni-Cd battery pack
Battery Life, typical Approximately two hours of continuous use from a full charge
Low Battery Indication,
typical Low battery message first appears approximately ten minutes
before the instrument powers off automatically
Battery Saver Standby Time-out and Backlight Time-out extend battery life.
Time-out ranges from 1 minute to 15 minutes, or off.
Battery Charging Time,
typical With TekScope instrument
operating 20 hours
With TekScope instrument
turned off 20 hours
In external charger 1.5 hours