Tektronix TekRanger 2 TFS3031, Service Manual

Page: 28 / 272

TFS3031 TekRanger/TekRanger 2 Service Manual
1–5
Operator Information
This section summarizes TFS3031 connector, button, and softkey functions.
A quick review of this section will familiarize you with the basic operation of the
TFS3031, which may help when servicing the instrument.
For complete operator information, refer to the TFS3031 TekRanger/TekRanger 2
User Manual.
WARNING.
INVISIBLE LASER RADIATION. To eliminate hazardous radiation
exposure do not use controls or adjustments, or perform procedures, other than
those specified in this manual.
CAUTION.
Do not fire the laser (push the button) unless a fiber is
connected to the Laser Output port. Damage to internal electronics can result.
Port Functions
Laser Output ports
9-pin RS232C serial port
Keyboard connector (on
upgraded instruments and
instruments with serial
numbers B030000 and above)
Optional 3.5 inch
floppy disk drive
Disk eject button
Dust caps and labeling omitted
from illustration
25-pin parallel port