Tektronix TDS1000B Series, Operator'S Manual

Page: 283 / 316

6
Using Menu Function Controls
TDS1000B and TDS2000B Series Oscilloscopes – Operator Training Kit 6-47
To recall a setup, follow these steps:
1. On the top of the front panel, push the DEFAULT
SETUP menu button.
This will display the sine wave at 1.00V vertical and
M500us horizontal settings.
2. On the top of the front panel, push the SAVE/RECALL
menu button.
3. Push the appropriate side-screen menu button to select
Action Recall Setup .
4. Push the appropriate side-screen menu button to select
Recall From Setup .
5. Push the appropriate side-screen menu button to select
Setup 1 .
6. Push the appropriate side-screen menu button to select
Recall .
You should again see a display as shown in Figure 6.14.
In this procedure, you saved a specific measurement setup
and recalled it from the setup location
Setup 1 .