![background image](http://html.mh-extra.com/html/tektronix/phaser-840/phaser-840_quick-reference-manual_1078590085.webp)
Service Guide
75
Vacuum check
Use this check to verify the actions of the vacuum pump and the solenoid valve.
In addition, you can determine if the cap/wipe/purge assembly is sealing
properly against the printhead faceplate.
1.
Turn off the printer.
2.
Remove the top and right-side covers.
3.
With a T-connector, connect the vacuum gauge to the between the
vacuum/pump module and the cap/wipe/purge unit.
Tools required
■
Magnetic screwdriver
■
Vacuum gauge
■
T-20 TORX tip
■
T-15 TORX tip
■
PC diagnostics
Connecting the vacuum gauge to the printer
0388-35
Vacuum guage
40
20
0
60
-76
Cap/wipe/purge
vacuum hose
T-connector
Vacuum
assembly
Summary of Contents for Phaser 840
