![background image](http://html.mh-extra.com/html/tektronix/phaser-840/phaser-840_quick-reference-manual_1078590153.webp)
Service Guide
143
18: Yellow Solid Fill
. This prints shows
uniformity of fill.
Look for:
Even, uniform fills throughout
the print. There should be no wrinkling or
deformity of the paper throughout the
print.
Causes:
Weak jets or uneven drum
heating may cause uneven fills.
To solve wrinkling, try different print
media. Replace the drum maintenance
tray to correct streaking.
Check the drum-temperature sensor for
debris build-up on the sensor. Or the
sensor is in improper contact with the
drum. Refer to the test print
Reverse
Text
.
The transfix pressure may be incorrect.
Perform the transfix spring adjustment
described in “Transfix roller pressure
spring adjustment” on page 72. As a last
resort, replace the drum/transfix
assembly.
19: Color Bands
This print consists of
sequential bands of primary and
secondary colors followed by a blue tint.
This print is used for manufacturing and
engineering evaluation of printhead
performance.
0388-37
Summary of Contents for Phaser 840
