![background image](http://html.mh-extra.com/html/tektronix/phaser-840/phaser-840_quick-reference-manual_1078590109.webp)
Service Guide
99
Drum position sensor assembly
1.
Remove the left cover.
2.
Remove the top cover.
Caution
Unhook the
head tilt spring
to avoid possible damage to the
printhead and drum.
3.
Disconnect the drum home-position sensor wiring harness from J180 of
left I/O board leading to the drum position assembly. Disconnect the
drum position encoder sensor at the drum position assembly.
4.
Remove the clear plastic dust cover from the drum position assembly.
5.
Precisely mark the end of the drum shaft relative to the drum home flag
on the drum position sensor assembly; this is not necessary if you are
also replacing the drum (as part of the drum/transfix assembly).
6.
Rotate the tilt gear to orient the gear’s missing teeth to the drum
position sensor assembly’s rear mounting screw.
7.
With a small, flatblade screwdriver, slide the retaining spring out of the
encoder wheel’s groove toward the encoder disk.
Marking the drum home flag sensor alignment
840-4-17
Mark on the drum shaft to
align with the home flag
Drum home
flag
Drum position
encoder wheel
Summary of Contents for Phaser 840
