Tektronix MDO4000C Series, User Manual

Page: 150 / 160

Compensating the probe with the MDO4000C series oscilloscope
See Compensating a TPP0500B or TPP1000 passive voltage probe on page 15.
Standard accessories
The standard accessories included with the probe are shown below.
WARNING.
To avoid electric shock when using the probe or accessories, keep
fingers behind the finger guard of probe body and accessories.
To reduce risk of shock, when using the probe on floating measurements, ensure
the reference lead accessories are fully mated before connecting the probe to the
circuit under test.
Item Description
Hook tip
Press the hook tip onto the probe tip and then clamp the hook
onto the circuit
Reorder Tektronix part number 013-0362-XX
Micro Hook tip
Use this tip to access test points in tight spaces. Press the hook
tip onto the probe tip and then clamp the hook onto the circuit
Reorder Tektronix part number 013-0363-XX
Rigid tip
This (gray, not shown) tip is included with your probe, but is not
pre-installed.
Reorder Tektronix part number 206-0610-XX
Pogo tip
This (white) tip is pre-installed on the probe.
This spring-loaded tip allows compliant testing of circuit boards.
The probe tip retracts slightly when pressure is applied to it and
then springs back into place.
Reorder Tektronix part number 206-0611-XX
Appendix B: TPP0500B and TPP1000 500 MHz and 1 GHz 10X passive probes information
128 MDO4000C Series Oscilloscope User Manual
Preliminary