6.
To change the scale (height) of the digital channels, push
Height
on the
lower menu.
NOTE.
The S (Small) selection will display each waveform at 0.2 divisions
tall. The M (Medium) selection will display each waveform at 0.5 divisions
tall. The L (Large) selection will display each waveform at 1 division tall. L
only works if there is enough room in the display to display the waveforms.
You can display up to 10 L waveforms at one time.
7.
You can label individual digital channels for easier identification. See
GUID-168896E1-E133-4460-8160-3A2D65209ADD#GUID-168896E1-
E133-4460-8160-3A2D65209ADD
8.
To group some or all of the digital channels together, move the channels right
next to each other. All the channels that are next to each other automatically
form a group.
You can see the groups by pushing
Select
on the side menu and turning
multipurpose knob
a
.
When a group is selected, turn multipurpose knob
b
to move the whole
group.
Viewing digital channels
The various ways of displaying data from the digital channels help you analyze
the signals. Digital channels store a high or low state for each sample.
Logic high levels are displayed in green. Logic low levels are displayed in blue.
When a single transition occurs during the time represented by one pixel column,
the transition (edge) is displayed in gray.
Display waveform or trace data
MDO4000C Series Oscilloscope User Manual
73
Preliminary
Summary of Contents for MDO4000C Series
Page 2: ...P r e l i m i n a r y...
Page 20: ...Compliance Information xvi MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 74: ...Acquire the signal 52 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 140: ...Save and recall information 118 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
