Taking manual measurements with cursors
Cursors are on-screen markers that you position in the waveform display to take
manual measurements on acquired data. They appear as horizontal and/or as
vertical lines. To use cursors on analog or digital channels:
1.
Push
Cursors
to turn cursors on.
NOTE.
A second push turns cursors off. You can also push and hold Cursors
to display the cursor menu.
In this example, two vertical cursors appear on the selected waveform. As you
turn multipurpose knob
a
, you move one cursor to the right or left. As you turn
knob
b
, you move the other cursor.
2.
With cursors on, push
Select
.
This turns the cursor linking on and off. If linking is on, turning multipurpose
knob
a
moves the two cursors together. Turning multipurpose knob
b
adjusts
the time between the cursors.
Analyze waveform or trace data
MDO4000C Series Oscilloscope User Manual
83
Preliminary
Summary of Contents for MDO4000C Series
Page 2: ...P r e l i m i n a r y...
Page 20: ...Compliance Information xvi MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 74: ...Acquire the signal 52 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 140: ...Save and recall information 118 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...