Tektronix MDO4000C Series, User Manual

Page: 117 / 160

3. Push Vertical on the side menu and use the multipurpose knobs to adjust the
vertical settings of the reference waveform or trace.
4. Push Horizontal on the side menu and use the multipurpose knobs to adjust
the horizontal settings of the reference waveform or trace.
5. Push Edit Label and use the resulting menus to define labels to display with
the reference waveforms and traces.
6. Pus Ref Details to read information about the selected reference. Use this to
determine whether the reference is an analog waveform or an RF trace.
7. Push Save to File to store reference information in external storage.
R1
Vertical
0.00 div
100 mV/div
3
Horizontal
0.00 s
4.00 μs/div
4
Edit Labels
Ref Details
Save to File
Quick Tips
■ Selecting and Displaying Reference Waveforms. You can display all the
reference waveforms at the same time. Push the appropriate screen button to
select a particular reference waveform.
■ Removing Reference Waveforms from the Display. To remove a reference
waveform from the display, push R on the front panel to access the lower
menu. Then push the associated lower menu to turn it off.
■ Scaling and Positioning a Reference Waveform. You can position and
scale a reference waveform independently from all other displayed
waveforms. Select the reference waveform and then adjust it with a
multipurpose knob. You can do this whether acquisition is running or not.
If a reference waveform is selected, scaling and repositioning of the reference
waveform operates the same way whether zoom is turned on or off.
■ Saving 10 M and 20 M Reference Waveforms. 10 M and 20 M reference
waveforms are volatile and not saved when the oscilloscope power is turned
off. To keep these waveforms, save them to external storage.
Analyze waveform or trace data
MDO4000C Series Oscilloscope User Manual 95
Preliminary