5.
Push
Actions
on the lower menu, which will display the Actions side menu.
Use this menu to select a action to occur upon the event just selected.
6.
Select the action type from the pop-up menu.
7.
Select whether or not to enable the action.
8.
If you selected Email Notification from the list of actions, you can now select
Configure E-mail
from the side menu to define the parameters of the email.
NOTE.
There is a single set of SMTP server settings saved for both Act on
Event e-mail notification and for the e-mail printer (set through the Utility >
Print Setup > Select Printer > Add E-mail Printer menus). If you modify the
SMTP settings in one of these two locations, they will be similarly modified
in the other location.
9.
Push
Repeat
from the lower menu to set how many times you want this
event and action pair to repeat.
Acquire the signal
MDO4000C Series Oscilloscope User Manual
47
Preliminary
Summary of Contents for MDO4000C Series
Page 2: ...P r e l i m i n a r y...
Page 20: ...Compliance Information xvi MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 74: ...Acquire the signal 52 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
Page 140: ...Save and recall information 118 MDO4000C Series Oscilloscope User Manual P r e l i m i n a r y...
