Speci
fi
cations
Table 23: Waveforms (Advanced mode), nominal (cont.)
Characteristic
Description
Digital waveforms
Support 32 channels of digital waveform output
Waveform length
64 to 64M points (1M = 1024x1024)
In multiple of 64 points for length <320 points
In multiple of 16 points for length
≥
320 points
Number of waveforms
Up to 16,384 user de
fi
ned waveforms
Pre-de
fi
ned waveforms are not included
Resolution
14 bits
Sequence length
1 to 16,384
Sequence controls
Repeat Waveform, Wait for Multiple Triggers (up to 7 triggers), Wait for Multiple Events (up to 7
events), Jump if Event (up to 7 events, sync. or asynch), Jump to (sync. or asynch).
Both groups can operate either in single or dual sequence modes: Groups1 includes analog1
and digital[15:0], Groups2 includes analog2 and digital[31:16].
In multi-sequencer mode, each channel has its own sequence. In single sequencer mode, all
channels share the same sequence.
Repeat count
1 to 2,097,151 or In
fi
nite
Jump timing
Synchronous or asynchronous selectable
Table 24: Analog output of Advanced Mode (AMP/Direct DAC/AC)
Characteristic
Description
Common characteristics
Connector
SMA on front panel
Output type
(+) and (-) Differential output and AC coupling output
Output impedance
50
Ω
, single-ended
100
Ω
, differential
On/Off control
Output relay is available for each channel. A control is common to the complementary output.
Skew between (+) and (–)
output, typical
Less than 20 ps, when in Direct output mode; Normal mode
Bandwidth
Calculated bandwidth, typical
AMP: 400 MHz
Direct DAC: 750 MHz
AC: 750 MHz
Amplitude
AWG4162 Speci
fi
cations and Performance Veri
fi
cation
15
