Tektronix AWG4162, Technical Reference

Page: 28 / 66

Speci fi cations
Table 24: Analog output of Advanced Mode (AMP/Direct DAC/AC) (cont.)
Characteristic Description
Range 50 Ω load, single ended.
AMP: 0 - 5 Vpp
Direct DAC: 0 - 0.8 Vpp
AC: 0 - 2 Vpp
In the case of differential output or high Z load, the amplitude is twice that of single ended
with 50
Ω load.
AMP mode: At frequency: >300 Hz to 550 MHz
0 Vpp to 3 Vpp, single ended, 50
Ω load
At frequency: >550 Hz to 600 MHz
0 Vpp to 2 Vpp, single ended, 50
Ω load
Accuracy
(For AMP and Direct DAC
mode) At frequency: 1 KHz (sine waveform)
Offset 0 V and Unit: Vpp
Accuracy (AMP, Direct DAC): ±(1% of
│ setting │ + 5 mV)
At frequency: 100 MHz (sine waveform)
Offset 0 V and Unit: Vpp
AC amplitude changes 1 mV/degree (1Vpp)
Accuracy, typical
(For AC mode) At frequency: 100 MHz (sine waveform)
Offset 0 V and Unit: Vpp
AC: ±(2% of
│ setting │ + 5 mV) – (room temperature –23) x 0.1% setting.
AC amplitude changes 1 mV/degree (1Vpp)
Resolution
AMP, Direct DAC, AC: 0.1 mV or 5 digits
Offset
Range 50 Ω load, single ended.
AMP: –2.50 V - + 2.50 V
Direct DAC: –0.35 V - + 0.35 V
In the case of differential output or high Z load, the amplitude is twice that of single ended
with 50
Ω load.
Accuracy 50 Ω load
Direct DAC: ±(1% of │ setting │ + 5 mV)
AMP: ±(1% of | setting │ + 5 mV)
Resolution AMP mode, DAC, AC: 10 mV or 3 digits
Vocm
Range 50 Ω load, single ended.
AMP: –2.50 V - + 2.50 V
Direct DAC: –0.35 V - + 0.35 V
In the case of differential output or high Z load, the amplitude is twice that of single ended
with 50
Ω load.
16 AWG4162 Speci fi cations and Performance Veri fi cation