Tektronix AWG4162, Technical Reference

Page: 40 / 66

Performance veri fi cation
Table 37: INIT and SYNCH error codes (cont.)
Sub error code Step description
1001000 CHECK_DEVICE_DATA
1001180 SET_SIMULATE_START_FROM_MASTER
1001190 RESET_SIMULATE_START_FROM_MASTER
1001200 GET_PRESCALER
1302001 CHECK_CHANNEL _DATA_CHANNEL A
1302011 TURN_OFF_RELAY_OUTPUT_CHANNEL A
1302021 DISABLE_ANALOG_OUT_CHANNEL A
1302031 LOAD_CHANNEL_FPGA_FIRMWARE_CHANNEL A
1302041 GET_CALIBRATION_PARAMETERS_CHANNEL A
1302051 SET_VARICAP_VOLTAGE_CHANNEL A
1302061 WRITE_FLATNESS_COMPENSATION_CHANNEL A
1302071 ADF4351_ENABLE_CHANNEL A
1302081 SET_DAC_CLOCK_SOURCE_CHANNEL A
1302091 ADF4351_CONFIGURATION_CHANNEL A
1302101 GET_ADF4351_STATUS_CHANNEL A
1302111 CHECK_ADF4351_STATUS_CHANNEL A
1302121 RESET_DAC_DELAY_LINE_CHANNEL A
1302131
SET_SYNC_DATA_DELAY_CHANNEL A
1302141
RESET_VARIABLE_DCM_CHANNEL A
1302151
RESET_FIXED_DCM_CHANNEL A
1302161 DAC_INITIALIZATION_CHANNEL A
1302171 SET_AS_MASTER_CHANNEL A
1302181 SET_AS_SLAVE_CHANNEL A
1302191 SET_SEQUENCER_MODE_CHANNEL A
1302201 TURN_ON_DC_DIRECT_OUTPUT_CHANNEL A
1302211 RESET_VOCM_DC_DIRECT_CHANNEL A
1302221 RESET_VOCM_DC_AMP_CHANNEL A
1302231 GET_FPGA_VERSION_CHANNEL A
1302241 SET_FILTER_PARAMETER_CHANNEL A
1302251 RESET_ATTENUATOR_CHANNEL A
1302261 CHECK_DIGITAL_POD_CONNECTION_CHANNEL A
1302271 SET_DIGITAL_POD_LEVEL_CHANNEL A
1302281 GET_IDENTIFIER_CHANNEL A
1302291 SET_SIGNAL_POLARITY_CHANNEL A
1302301 GET_FUNCTIONALITY_CHANNEL A
1302311 CHECK_FUNCTIONALITY_CHANNEL A
1302321 EXTERNAL_MODULATION_CALIBRATION_CHANNEL A
28 AWG4162 Speci fi cations and Performance Veri fi cation