Important safety information
This manual contains information and warnings that must be followed by the user
for safe operation and to keep the product in a safe condition.
To safely perform service on this product, additional information is provided at
the end of this section. (See page vii,
General safety summary
Use the product only as speci
fi
ed. Review the following safety precautions to
avoid injury and prevent damage to this product or any products connected to it.
Carefully read all instructions. Retain these instructions for future reference.
Comply with local and national safety codes.
For correct and safe operation of the product, it is essential that you follow
generally accepted safety procedures in addition to the safety precautions speci
fi
ed
in this manual.
The product is designed to be used by trained personnel only.
Only quali
fi
ed personnel who are aware of the hazards involved should remove
the cover for repair, maintenance, or adjustment.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions related to operating the system.
When incorporating this equipment into a system, the safety of that system is the
responsibility of the assembler of the system.
To avoid
fi
re or personal
injury
Use proper power cord.
Use only the power cord speci
fi
ed for this product and
certi
fi
ed for the country of use.
Do not use the provided power cord for other products.
Ground the product.
This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, make sure that the product is properly grounded.
Do not disable the power cord grounding connection.
Power disconnect.
The power cord disconnects the product from the power
source. See instructions for the location. Do not position the equipment so that
it is dif
fi
cult to operate the power cord; it must remain accessible to the user at
all times to allow for quick disconnection if needed.
AWG4162 Speci
fi
cations and Performance Veri
fi
cation
v
