Tektronix AWG4162, Technical Reference

Page: 29 / 66

Speci fi cations
Table 24: Analog output of Advanced Mode (AMP/Direct DAC/AC) (cont.)
Characteristic Description
Accuracy 50 Ω load
Direct DAC: ±(6% of │ Vocm output range │ + 5 mV)
AMP: ±(1% of | setting │ + 5 mV)
Resolution AMP mode, DAC, AC: 10 mV or 3 digits
Voltage window range In the case of differential output or high Z load, the amplitude is twice that of single ended with
50
Ω load. No DC offset applied in AC mode.
Window includes Max DC Vocm (± 2.5 V) for AMP.
50
Ω load, single ended.
1 μ Hz to 300 MHz AMP: –5 V - + 5 V
Direct DAC: –0.4 V - + 0.4 V
AC: –1 V - +1 V
>300 MHz to 550 MHz AMP: –4 V - + 4 V
>300 MHz to 600 MHz
Direct DAC: –0.4 V - + 0.4 V
AC: –1 V - +1 V
>550 MHz to 600 MHz AMP: –3.5 V - + 3.5 V
Main output
Level fl atness, typical In different mode:
AMP: At amplitude 1.0 Vpp , relative to 100 kHz; AMP mode is LPF ON
DAC: At amplitude 0.5 Vpp , relative to 100 kHz
AC: At amplitude 1.0 Vpp , relative to 10 MHz
AWG4162 Speci fi cations and Performance Veri fi cation 17