AFG1000 Series Arbitrary Function Generator Programmer Manual
25
Command Descriptions
Arguments
If
[SOURce[1|2]]
are omitted, CH 1 is specified automatically.
ON or <NR1>≠0 enables AM modulation.
OFF or <NR1>=0 disables AM modulation.
Returns
<NR1>
Examples
SOURce1:AM:STATe ON
enables the CH 1 AM modulation.
[SOURce[1|2]]:ASKey[:AMPLitude]
This command is not supported for AFG1022.
This command sets or queries the modulation amplitude of ASK modulation for
the specified channel. Set the modulation amplitude from 0 Vpp to the current
amplitude of the carrier waveform.
Units
Amplitude resolution
Vpp
1 mVp-p or four digits
Conditions
AFG1062 only
Group
Source
Syntax
[SOURce[1|2]]:ASKey[:AMPLitude]
{<amplitude>|MINimum|MAXimum}
[SOURce[1|2]]:ASKey[:AMPLitude]
?
[MINimum|MAXimum]
Arguments
<amplitude>::=<NRf>[<units>]
where:
<NRf> is the modulation amplitude.
<units>::=[Vpp]
MINimum sets the modulation amplitude to minimum value.