AFG1000 Series Arbitrary Function Generator Programmer Manual
45
Command Descriptions
Sweep
√
√
Burst
√
√
√
If you specify EFILe when there is no EFILe or the EFILe is not yet defined,
this command causes an error.
If you change the type of output waveform, it might change the output frequency
because changing waveform types impacts the setting range of output frequency.
USER<NR1>
|EMEMory
<NR1> specifies the user waveform memory location.
For the AFG1022, <NR1> can be any number from 0 to 255.
For the AFG1062, <NR1> can be any number from 0 to 31.
A user defined waveform saved in the user waveform memory or the
EMEMory can be selected as an output waveform.
EFILe
EFILe is specified as an output waveform.
Returns
SIN|SQU|PULS|RAMP|PRN|
<Built_in>
|USER<NR1>|EMEMory|EFILe
Examples
SOURce1:FUNCtion:SHAPe SQUare
selects the shape of CH 1 output waveform to square waveform.
[SOURce[1|2]]:PHASe[:ADJust]
This command sets or queries the phase of output waveform for the specified
channel. Set the value in radians or degrees. If no units are specified, the default
is RAD. The query returns the value in RAD.
This command is supported when you select a waveform other than DC and
Noise.
Group
Source
Syntax
[SOURce[1|2]]:PHASe[:ADJust]
{<phase>|MINimum|MAXimum}
[SOURce[1|2]]:PHASe[:ADJust]
? {MINimum|MAXimum}
Arguments
<phase>::=<NR3>[<units>]
