AFG1000 Series Arbitrary Function Generator Programmer Manual
31
Command Descriptions
Conditions
For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.
Group
Source
Syntax
[SOURce[1|2]]:FM[:DEViation]
{<deviation>|MINimum|MAXimum}
[SOURce[1|2]]:FM[:DEViation]
? [MINimum|MAXimum]
Arguments
<deviation>::=<NRf>[<units>]
where:
<NRf> is the frequency deviation.
<units>::=[Hz | kHz | MHz]
Returns
<deviation>
Examples
SOURce1:FM:DEViation 1.0MHz
sets the CH 1 frequency deviation to 1.0 MHz.
[SOURce[1|2]]:FM:INTernal:FREQuency
This command sets or queries the internal modulation frequency of FM
modulation for the specified channel. Use this command when the internal
modulation source is selected.
Set the internal modulation frequency from 2 mHz to 20.00 kHz with resolution
of 1 mHz.
Conditions
For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.
Group
Source
Syntax
[SOURce[1|2]]:FM:INTernal:FREQuency
{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:FM:INTernal:FREQuency
? [MINimum|MAXimum]
