46
AFG1000 Series Arbitrary Function Generator Programmer Manual
Command Descriptions
where:
<NR3> is the phase of output waveform.
<units>::=[RAD | DEG]
If <units> are omitted, RAD is specified automatically. The setting ranges are:
RAD: 0 to +2 PI, relative to phase value
DEG: 0 to +360, relative to phase value
Returns
<phase>
Examples
SOURce1:PHASe:ADJust MAXimum
sets the maximum value for the phase of CH 1 output waveform.
[SOURce[1|2]]:PHASe:INITiate (No Query Form)
This command synchronizes the phase of CH 1 and CH 2 output waveforms. The
arbitrary/function generator performs the same operation if you specify either
SOURce1 or SOURce2.
Group
Source
Syntax
[SOURce[1|2]]:PHASe:INITiate
Arguments
None
Examples
SOURce1:PHASe:INITiate
synchronizes the phase of CH 1 and CH 2 output signals.
[SOURce[1|2]]:PM[:DEViation]
This command sets or queries the peak frequency deviation of PM modulation for
the specified channel.
Conditions
For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.