22
AFG1000 Series Arbitrary Function Generator Programmer Manual
Command Descriptions
Group
Source
Syntax
[SOURce[1|2]]:AM:INTernal:FREQuency
{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:AM:INTernal:FREQuency
? [MINimum|MAXimum]
Arguments
<frequency>::=<NRf>[<units>]
where:
<NRf> is the modulation frequency.
<units>::=[Hz | kHz | MHz]
Returns
<frequency>
Examples
SOURce1:AM:INTernal:FREQuency 10kHz
sets the CH 1 internal modulation frequency to 10 kHz.
[SOURce[1|2]]:AM:INTernal:FUNCtion
This command sets or queries the modulating waveform of AM modulation for
the specified channel. Use this command when the internal modulation source is
selected.
If you specify EFILe when there is no EFILe or the EFILe is not yet defined,
this command causes an error.
Conditions
For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.
Group
Source
Syntax
[SOURce[1|2]]:AM:INTernal:FUNCtion
{SINusoid|SQUare|RAMP|PRNoise
|USER<NR1>|EMEMory|EFILe}
[SOURce[1|2]]:AM:INTernal:FUNCtion?
Related Commands