54
AFG1000 Series Arbitrary Function Generator Programmer Manual
Command Descriptions
Group
Source
Syntax
[SOURce[1|2]]:PULSe:DCYCle
{<percent>|MINimum|MAXimum}
[SOURce[1|2]]:PULSe:DCYCle
? [MINimum|MAXimum]
Arguments
<percent>::=<NR2>[<units>]
where:
<NR2> is the duty cycle.
<units>::=PCT
Returns
<percent>
Examples
SOURce1:PULSe:DCYCle 80.5
sets the duty cycle of the pulse waveform on CH 1 to 80.5%.
[SOURce[1|2]]:PWM:INTernal:FREQuency
This command sets or queries the internal modulation frequency of PWM
modulation for the specified channel. Use this command when the internal
modulation source is selected.
Set the internal modulation frequency from 2 mHz to 20.00 kHz with resolution
of 1 mHz.
Select the source of modulating signal by using the
[SOURce[1|2]]:PWM:SOURce [INTernal|EXTernal] command.
Conditions
AFG1062 only
Group
Source
Syntax
[SOURce[1|2]]:PWM:INTernal:FREQuency
{<frequency>|MINimum|MAXimum}
[SOURce[1|2]]:PWM:INTernal:FREQuency?
Related Commands
