14
AFG1000 Series Arbitrary Function Generator Programmer Manual
Command Descriptions
Commands either set or query instrument values. Some commands both set and
query, some only set, and some only query.
Manual Conventions
This manual uses the following conventions:
No Query Form indicates set-only commands
A question mark (?) appended to the commands and Query Only indicates
query-only commands
Fully spells out headers, mnemonics, and arguments with the minimal
spelling shown in upper case; for example, to use the abbreviated form of the
DISPlay:BRIGhtness command, just type DISP:BRIG
Syntax of some commands varies, depending on the model of instrument
you are using; differences are noted
AFGControl:CSCopy (No Query Form)
This command copies setup parameters for one channel to another channel.
Group
AFG Control
Syntax
AFGControl:CSCopy {CH1|CH2},{CH1|CH2}
Arguments
CH1|CH2
Examples
AFGControl:CSCopy CH1,CH2
copies the CH1 setup parameters into CH2.
*CLS (No Query Form)
This command clears all the event registers and queues, which are used in the
instrument status and event reporting system.
Group
Status
