Plug-h Unit Installation and Removal
To avoid
set the
ON/STANDBY
switch to STANDBY
be f or e
installing or
Initialized Setting
At the beginning of most steps, the user is instructed to Initialize the instrument
part of the setup. The Initialize feature, available through the Utility menu,
all instrument controls and functions to known
Initializing the instrument at
the beginning of a step eliminates the possibility of settings from previous steps
causing erroneous or confusing results. For more information on
refer
to the mainframe User’s Reference manual.
Test Equipment
Table 2-l contains suggested test equipment used with the Checks and Adjustment
Procedure. Procedure steps are based on the test equipment examples given, but
other equipment with similar specifications may be substituted.
using other
equipment could alter the test results, the setup information, or the related
connectors and adapters required.
Procedure Parts
The procedure is divided into the following parts which
should
be
sequentially:
1.
Initial Setup
2 .
Examine/Adjust Step Response
3 .
Check Bandwidth
4 .
Enhanced Accuracy
5 .
Check DC Balance
6 .
Check AV DC Accuracy
1 .
Check DC Offset Accuracy
Checks and Adjustments- llA32 Service Reference
Summary of Contents for 11A32
