Tektronix 11A32, Service Reference Manual, Page: 22 / 71

Standard
Examine/Adjust Plug-h Step Response (Al Al
Perform the following settings in the order listed:
Coaxial Cable
1. Remove the left cover from the
2. the IA32 into mainframe Center plug-in compartment.
3. Connect the 067-0681-01 to the CH I input connector.
4.
Connect a 50 coaxial
cable from the Calibration Generator High
Output connector to the
Calibration Generator
Triggered Fully clockwise
Oscilloscope Mainframe
ON
Wait for calibration
Utility menu
Utility menu Instrument Options Waveform
center
CH on
Oscilloscope Mainframe
1
position positive-going to first
graticule left edge of
Triggered rotate control
the point where a step just to appear
on the lower part of the positive-going edge.
Oscilloscope Mainframe
Acquire Description
position positive-going edge between the and
second graticule lines from the left edge of the
position top of step to the center
horizontal
Numeric Knob menu Fine
Size. 5 step amplitude display
set readout for 10% of present readout (-4
Offset position tight side of trace to
center horizontal graticule line
Checks and Adjustments- Service