Initial Inspection
lnstalling and
This instrument was inspected mechanically and electrically before shipment.
should not have any mars or scratches and should
meet
all elec-
trical specifications.
the plug-in for possible physical damage incurred in transit. Use the In-
coming Inspection Procedure shipped
the instrument to verify instrument per-
formance. If you find damage or deficiency, contact your local Tektronix
Of-
fice or representative.
Removing the Plug-In
To install the plug-in in any
oscilloscope mainframe:
Set the mainframe ON/STANDBY switch to STANDBY to prevent damage to
the instrument.
indicator
remains ON when
is
the switch has been
left
internally disabled
the
servicing of the power supply. To enable the
refer
the Maintenance section
of
the
Service Manual.
2 .
Align the grooves in the top and bottom of the plug-in with the guides in the
mainframe plug-in compartment.
3 . Insert the plug-in into the mainframe until its front panel is flush with the
front panel of the mainframe.
To remove
plug-in from a mainframe.
1.
2 .
3 .
Set the mainframe ON/STANDBY switch
STANDBY to prevent damage to
the instrument.
Pull the release latch (see Fig. I-l) to disengage the unit fmm the mainframe.
Pull the plug-in straight out of the plug-in compartment.
General Information 1
Service Reference
Summary of Contents for 11A32
