Packaging for Shipment
If possible, save and reuse the original cation and packaging to package the
ment when shipping it by commercial transportation. Package and ship plug-in
and mainframes separately.
Attach a tag to the plug-in if it is shipped to a Tektronix
for service
or repair. Include the following information on the
l
Name and address of the instrument owner;
Name of a person at your
who can be contacted about the instrument;
Complete instrument type and serial number, and
. A description of the service required.
Package the plug-in as follows, if the original package is not available or is not fit for
use:
2 .
3 .
4 .
5 .
Obtain a corrugated cardboard carton with inside dimensions at least six inches
greater than the instrument dimensions. Use a carton with a bursting test
strength of at least
pounds per square inch.
Fully wrap the plug-in with anti-static sheeting, or its equivalent, to protect the
finish.
Tightly pack
or urethane foam between the carton and the instrument
to cushion the plug-in on all sides. Allow three inches of packing on each side.
Seal the carton with shipping tape or with industrial staples.
Mark the address of the Tektronix Service Center and your return address on
the carton in one or more prominent places.
Plug-In Memory Backup Power
The non-volatile
NV RAM) within the plug-in allows retention of
the data in
when the mainframe power is removed.
NV RAM stores system-configuration data such as the plug-in, mainframe, and
probe
as well as the calibration constants. The
that the NV RAM stores,
enable the plug-in to resume Enhanced Accuracy performance from a
down condition, without performing a full calibration (Enhanced Accuracy) opera-
tion.
The rated lifetime of the
integral power source is ten years. If,
sys-
tem power-up, the plug-in habitually loses Enhanced Accuracy status without a sys-
tem configuration change (that is, the plug-in remains plugged into the same slot in
the same mainframe), then the NV RAM might require replacement.
General Information-
Service
Summary of Contents for 11A32
