background image

 

 

 

 

 

Trends Audio TA-10 

Class-T Stereo Amplifier/Power Amplifier

 

Ver. 1.2  

 

USER GUIDE 

 

 

 

     

 

 

 

 

 

 

Copyright Notice 

 

Copyright © 2006 ITOK Media Limited, All rights reserved. 

All rights in this publication are reserved and no part may be reproduced without the 

prior written permission of the publisher. The contents of this publication are believed 

to be correct at the time of going to press, but any information, specifications, products 

or services mentioned may be modified, supplemented or withdrawn without further 

notice. 

 

 

 

Trademarks

 

 

Trends, Trends Audio, and ITOK are the trademarks owned by ITOK Media Limited 

 

Tripath is the registered trademark owned by Tripath Technology Inc. 

 

All other trademarks are the property of their respective owners. 

 

 

 

 

 

 

ITOK Media Limited 

Unit E,13/F.,World Tech Centre,  

95 How Ming Street, Kwun Tong, Kowloon, Hong Kong 

Tel: +852 2304 0730  

Fax: +852 2566 5740 

Email: [email protected] 

Web: 

www.TrendsAudio.com

  

 

 

Summary of Contents for Trends Audio TA-10

Page 1: ... of going to press but any information specifications products or services mentioned may be modified supplemented or withdrawn without further notice Trademarks Trends Trends Audio and ITOK are the trademarks owned by ITOK Media Limited Tripath is the registered trademark owned by Tripath Technology Inc All other trademarks are the property of their respective owners ITOK Media Limited Unit E 13 F...

Page 2: ...er efficiency and physical size is just like Class D amplifiers Even it s maximum output power is only 2x15W TA 10 is actually powerful to push even the floor stand speakers with sufficient and good control of bass sound It has no problem for normal home use purpose 2 2 F Fe ea at tu ur re es s applied the proprietary T amp technology for audiophile quality sound high power efficiency 90 and less ...

Page 3: ...tage can enhance the purity of the sound and minimize the pop sound when power on and off The DC bias has been pre set in factory But after run in for a period it would be slightly changed that the fine tuning is needed Before you tune these you need a screwdriver take off the case a small screwdriver turn the screw of the potentiometer and a digital multi meter to detect the DC bias voltage 1 Use...

Page 4: ...ection 6 Troubleshooting Section 7 Accessories Section 8 Contact Us 8 6 6 T Tr ro ou ub bl le es sh ho oo ot ti in ng g If your machine is out of order it may not be very serious Before you call your local distributor or us to repair you are suggested to check the following Symptoms Possible Reasons Handling Methods power cords not properly connected properly connect the power cords cannot power O...

Reviews: