Tektronix 11A32, Service Reference Manual

Page: 10 / 71

Section
General
1
information
This section all the information needed apply power to the 1 IA32 Two
Channel Amplifier.
Information on installing and removing the plug-in, instrument options, packaging
for shipment, as well as conditions such as and
ventilation is included here.
Introduction
This manual is designed for use by qualified service It contains
lion necessary to check, troubleshoot, and maintain the llA32 Two Channel Ampli-
fier. Troubleshooting is primarily based upon internal diagnostics. These diagnos-
tics suspect Replaceable Unit). Once the faulty FRU is
the instructions provided in this manual to and replace it. Section
5, Parts gives a complete of the in this
llA32 plug-in is a two-channel, wide-bandwidth plug-in amplifier that plugs
into any of the plug-in Commands from the mainframe
control all plug-in functions. The plug-in front panel has a momentary pushbut-
ton and a back-lighted “display indicator for each input channel. controls
and indicators are located on the mainframe.
Input impedance of each channel is set independently to either 1 or
Bandwidth can be to 20 MHz or MHz. Each channel provides a display
and a trigger output to the host mainframe. Each of outputs is of
any mainframe-specified combination of the input signals. The plug-in also
an auxiliary output from each channel to
mainframe.
Each has a connector. The input con-
nector accepts a or 2 a probe with a bnc connector,
a bnc connector. The plug-in detects the probe-encoding information and uses
information to automatically the desired settings.
Plug-in to Mainframe Compatibility
The system bandwidth depends on the host mainframe. about bandwidth
included in Part 4, of the User’s Reference Supplcmcnt, and in
Tektronix Catalog. Refer to Corporate Catalog for
compatibility information.
General Information 1 Service Reference
I-l